Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window replacement has been damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you're planning to try to remove the window panes by yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you may think about a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, Window doctor it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or by poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC Window Doctor.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them re-aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace them.

These seals can wear down or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.