Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional comes out to repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is large, you might need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit, tighten the screws until they remain in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your upvc window repairs windows remain watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and window doctor then reverse the mechanism back into its original position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously may require removal before a new layer is applied. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazing repair glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens in a breeze. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the Window doctor easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges, also due to wear and tear may become displaced, which causes gaps to develop where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace them.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.