Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and Upvc Repair doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double glazing-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you are going attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards will fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional arrives to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer is applied. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazing glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is essentially a very simple process, but it's easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to provide advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, which can cause a gap where the sash meets frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. In addition, the interlock could be disaligned. It is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and UPVC repair again will lessen draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach the point when it's more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.