Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. However when windows with double panes are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will keep water and Upvc Window Repair drafts from entering your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is large, you might want to use a security screen that also has windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts and even security. It's crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can get at the frame. After that, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your upvc window repair window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close your window and do a test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease It could be hinges at the fault. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the possibility of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash and frame meet. If they are damaged beyond repair, it may be required to realign them. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. They can keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.