magnetic planar speakers (their website) - Holographic 3D Imaging and Stunning Clarity

Using a thin tensioned diaphragm suspended between two arrays magnets that vibrate, they create sound waves. Planar magnetic speakers are known for their incredible clarity and holographic 3D images.

They also have a wide horizontal and vertical dispersion, low distortion and affordable costs making them ideal for many audio applications.

Superior Sound Quality

Planar magnetic speakers are famous for delivering clear, precise sounds with low distortion. They do this by employing a flat diaphragm that has a conductive pattern on it. It reacts to the magnetic field generated by magnets either on the one or both sides of the speaker. The diaphragm is moved and causes sound waves to be transmitted through a dipole- or monopole-radiation pattern. This allows the diaphragm to move more evenly and produce higher-quality sound than a typical dome or cone driver.

Planar magnetic drivers also have the benefit of a large and magnetic planar speakers uniform sound dispersion. This allows the sound to be heard from any location within the room. Planar dipole or ribbon speakers also have a natural, spacious soundstage with a few resonances. This results in an immersive listening experience that brings music to life in a manner that is difficult to duplicate with other kinds of speakers.

Planar magnetic speakers have a bigger surface area than cone drivers and are more durable. They can also be operated at greater volumes without causing distortions or vibrations. They are also quieter than other types of speakers, which makes them an ideal choice for home theatre and HiFi applications.

Planar speakers are more expensive due to their complicated design. However, they deliver better audio quality and are well worth the investment. Planar speakers also have a lower impedance than other types of loudspeakers. This makes them easier for amplifiers drive.

Planar magnetic speakers are an excellent choice for both professional and home use. However they aren't as well-liked in IEMs because they require more intricate engineering to fit into smaller form factors like headphones and earbuds. Recently, however there has been a rise in the number of IEMs that feature planar magnetic technology. These include the Rinko by Seeaudio, and the S12 and Z12 by LETSHOUER that have proven to offer an outstanding listenable experience.

Lower Distortion

For many audiophiles the most desired characteristic of a speaker or headphone is its low distortion. The distortion is caused in the speaker due to various factors, but perhaps the most prevalent cause of distortion is the voice coil inductance. When an alternating current is fed through a conventional moving coil driver's voice coil, the inductance of the voice coil creates magnetic fields that cause a movement of the diaphragm. The movement or excursion is what creates the sound wave, however it also generates unwanted resonances and harmonics which degrade the quality of the audio.

Magnetic planar speakers have a much lower distortion than traditional dynamic drivers. This is due to the fact that the "voice coil" is spread out over an extensive surface instead of being squeezed into a tiny gap inside a huge chunk of metal. As a result, an appropriately designed planar magnetic speaker can handle a lot more power than the traditional dynamic driver, without audible strain.

Another way in which planar magnetic speakers reduce distortion is by providing an almost perfect resistive load to the amplifier within the system. This is because the voice coil is a very long, thin wire that behaves just like a simple resistor. This makes the amplifier simple to drive and will sound the best when driven by the magnetic planar speaker.

The high efficiency of these speakers is that they generate little heat, even when playing a lot of music. This is crucial because the heat produced can harm the voice coil, reducing its lifespan and causing distortion.

This doesn't mean that all single-ended planar magnetic closed back headphones magnetic speakers are free of distortion. Because of their close magnet spacing, the magnetic forces can interact with one with one another and pull each other to a considerable extent, which can cause changes in the diaphragm's elasticity as time passes. This problem is made worse due to the proximity of adjacent rows of magnets.

Better Heat Dissipation

Many specialist HiFi audio headphone companies have been creating amazing masterpieces in the past few years that use planar magnetic technology. Planar magnetic drivers have some remarkable advantages over the standard coiled dynamics used in most headphones and speakers.

The main benefit is that the "voice coil" is spread across more of a larger area than a conventional cone speaker, allowing it to dissipate heat efficiently and not get too hot. This lets the voice coil operate more efficiently and with less distortion and also permits a diaphragm that is light and can be driven at extremely high levels of excursion.

This allows for the planar magnetic speaker to have a remarkably rapid transient response, meaning that sharp peaks as well as tiny details can be reproduced very accurately even at very high SPLs. This also means that the sound is extremely clear and free from distortion and is indistinguishable from the original source material.

The planar magnetic speakers has a very flat impedance curve, from about 4.2 ohms in the bass, to 3.3 ohms in the Treble. This makes it a simple load to drive amplifiers, and is similar to resistive loads used by electronic manufacturers to showcase their products' quality.

A ribbon/planar diaphragm which is extremely lightweight can move quickly and without much strain. This results in a clean and clear sound with a wide bandwidth and excellent linearity.

The ribbon/planar design is very quiet, which reduces distortion even more. Additionally, it is extremely robust across a wide range of temperatures, which enables the speaker to provide consistent sound quality for long periods of time and across a broad listening area.

Although there are many benefits to using a Ribbon/Planar Speaker however, it is crucial to remember that this type of speaker is not suitable for all applications or listeners. For example, a ribbon/planar speaker with a large radiating panel requires a very large room to create a full-range sound with an sufficient SPL. Most of these speakers are only sold as tweeters or as upper mid/high range components in a two-way system of speakers.

Higher Power Handling

Magnetic planar drivers deliver clarity and clarity that is not matched by cone drivers. They can reveal subtle nuances in your music, and reproduce complex sounds with accuracy. They also have a wide frequency response, which means they can produce a wider range of frequencies with greater accuracy.

Planar speakers create a focused sound field, which could be a disadvantage if you're listening to them in an area with other people. It's also what gives them their incredible high-quality sound and crystal clear imaging. The sound seems to be emitted directly from the speaker, like the sound of a laser beam, which can be heard even when off-axis.

The flat diaphragm in combination with the acoustic waves front, gives them a greater perception of space and depth than cone speakers. They also have a a lower noise floor and magnetic planar speakers are less distracting in noisy environments. Many audiophiles prefer the natural sound quality of planar magnetic drivers over other types of technology.

However, there are limitations to the technology. Planar drivers are more difficult to make than cone drivers that are conventional, and they can be heavy, which makes them difficult to mount in certain conditions. They also require more power to drive, which may limit the output they can attain.

Wisdom Audio is the leader in the development and application of PMD technology. Its products continue advance the boundaries of this cutting-edge technology. The new materials that it has patented can endure temperatures that are much higher than PET, which is used in the majority of planar driver. Its unique design minimizes the effects of diffraction that can occur when sound waves travel through narrow gaps or curves.

This is why its speakers and headphones are known to deliver an exceptionally clear and detailed sound that's free of distortion. They're also more responsive than cone drivers that are traditional which helps increase their bass response. They can also reproduce high frequencies with amazing precision, and they're capable of producing powerful, deep bass.