Ghost Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving your vehicle with the original keys. Our latest immobiliser connects to your vehicles CAN data network & a unique PIN code must be entered for the engine to start.

Ghost unlike trackers, doesn't emit radio frequency signals and can't be identified by diagnostic tools. There are also no LED indicators or buttons that can give away its presence within your car or van.

Anti-key cloning

The ghost immobiliser has been created to fight key cloning and hacking. This device connects with your vehicle's data network CAN and creates an unique pin code by using the factory buttons on your dashboard and steering. This prevents the thief being able to start your car. If the incorrect PIN is entered, it will stop your engine from running, making it impossible for you to drive away with joy and pride.

Ghost immobilisers use new technology that is extremely difficult for thieves to defeat. Contrary to physical deterrents, such as wheel locks and steering locks that can be cut or taken the ghost immobiliser is a discrete electronic device that isn't recognized by ordinary thieves, as it doesn't emit radio signals and works silently.

This next generation immobiliser is equipped to shield your car from a variety of threats including keys that are duplicated, key-hacking, and relay attacks. It can also stop thieves from stealing keys or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN code.

The ghost immobiliser 2, unlike other immobilisers does not require the use of a remote control or key fob to operate. It is able to be deactivated via the driver's mobile with a simple application. This is ideal when you need to give your car away for valet parking or maintenance without key fobs.

The autowatch ghost immobiliser Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It is designed to make it as easy and convenient to use while remaining as secure as possible. This is accomplished by connecting the Ghost-II into the vehicle's data network CAN, meaning that there aren't any additional wires that can be hidden or easily found. It also features an inbuilt feature that lets you to disable your Ghost-II by connecting to the vehicle's Bluetooth, ghost immobiliser so you can enter and drive with no hassle.

OBD port hacking

OBD port hacking is the latest method employed by professional auto thieves to steal cars. Thieves are able to access your vehicle's OBD by using a laptop, a mobile app, and some cables that are available online for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they like including resetting fault codes and tuning your car to taking your joy and pride away in under a minute.

If you have an Ghost immobiliser, it can stop your car being stolen using this method, by making sure that a unique PIN sequence is entered alongside the fob of your key in order to start the engine and then drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It also has a Service/Valet mode which allows your vehicle to be started without needing the PIN code.

You'll also require a cable with OBD pins that are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. Also, you will require a cable with OBD pins that are connected to the CAN Bus. These cables are available on eBay or Amazon for PS50. The cable must be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, ghost immobiliser they will send diagnostics to the system with high baud rates that will cause a crash of the car's CAN and prevent the system from functioning. This can cause the engine to stall or even lock doors, and even the brakes to activate.

No need to purchase additional remotes or key fobs

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars across the globe. Using engine ECU software to prevent cars from starting if a fake transponder signal is transmitted to it an aftermarket immobiliser is an excellent method of protecting your vehicle.

However, it could be simple for a burglar to get around an immobiliser system when they have access to the code that allows them to disable it. A burglar can easily remove the battery from most key fobs by squeezing them open. They can then use an easy tool to take out the internal circuit board of an immobiliser and replace it with blank. They'll then be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet data loop in the CAN which cannot be detected by diagnostic tools such as the ones used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicators, which means it is invisible.

There will be times when you need to deactivate Autowatch Ghost 2's automatic security for instance, during the valet parking or servicing. Ghost CAN immobilisers have a mode called "Service Mode,' which you can activate with a simple push of a button on your phone. The car can still be operated, but its maximum speed will be limited to 36mph for added security.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will explain the process and provide you with your ghost 2 immobiliser cost 2 emergency card, installation certificate, and security assurance.

Simple Change of PIN Code

Ghost is the next-generation device that secures your car without cutting wires or installing key fobs from an aftermarket. It is directly connected to the vehicle's CAN data network and a personalised PIN code is programmed in it using buttons on your steering wheel and the dash. The system stops engine start and can't be bypassed as no RF signals are generated from the device. This makes it unrecognisable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code can be altered to block previous drivers or even include an override code in case you forget the sequence. The installer will guide you through how to do this during installation. The system has a valet-mode feature that allows you to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without having to know the pin number. This is a great choice for those who don't want their pin number to be divulged, but would like to leave their vehicle with valet parking or service.

In contrast to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons on your car to create a unique and interchangeable PIN code sequence. This sequence is entered via the smartphone application. There are no additional LED indicators are used, and your car is protected without risk of being disabled.

Tested for each vehicle

A ghost immobiliser, unlike key fobs that require pressing buttons, is discretely installed under the steering wheel or dash. It is not obvious that it's there. The device is connected to your car's CAN data networks and a personalised PIN code is programmed into it by using the buttons already on your car. The system stops your engine from running until this code has been entered before. This means that thieves cannot duplicate your keys or access the OBD port to hack into your vehicle.

Ghost can be utilized in all vehicles including electric cars motorhomes, vans, and bikes. It's also extremely versatile and can be set to disable in a variety of situations. For instance, it can be programmed to enter Valet mode when the vehicle is being transported to a valet parking or a service provider. This permits you to drive within a 30mph speed limit, and the ghost immobiliser will start to activate itself when your vehicle is returned to your home.

The device can be reset at any time to your personal PIN code. This is helpful if you forget the code or the device is inoperable and is as good as new again.

It's also worth noting that the device is completely unnoticeable to anyone who isn't familiar with it. It does this by running through the buttons on your steering wheel and dashboard, and using the data they send in order to determine which button was activated. This makes it a safe and secure security system that can't be manipulated through RF scanning or jamming, or a door lock pick set.