Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism faulty? Perhaps the door or window handles don't meet up correctly or are difficult to use.

It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

It can be quite frustrating when a key gets stuck into the lock. It could also be an issue for security, since the door may not be locked and leave you vulnerable to intruders. There are a couple of quick fixes you can make to resolve the issue and make your door functional again.

Keep calm. If you panic, you could end up pushing the broken key further into the lock.

Then spray WD-40 or a different penetrating oil into the lock to make the broken piece slide out more easily. You can also use the screwdriver to break up any pieces that are stuck. If you have a chunk of the key that's still sticking out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have any of these items, you can bend a hook with needle-nosed pliers. You can also make use of a pair of tweezers to grab and pull out the remaining pieces of broken keys.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It is available at all hardware stores, and it works by freezing any moisture or ice that might be inside the lock.

If none of these solutions work, it may be time to call a locksmith. The experts at Fitlocks can quickly solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms so that they are more easy to operate. You can request an appointment online for a double-glazing repair or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an immediate security risk. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder in order to repair it. They can do this using a hammer or other tool, but the best way is to employ a long match or piece of wire. Place the match or wire's end in the keyway. The locksmith can then strike the lock to break it. This is better than using a hammer that could cause damage to the lock.

Overheating is the most common cause of cylinder heads cracking. This can happen when the cylinder block and cylinder head are made of different metals, such as cast iron and aluminium. Different metals can heat up and cool off at different rates. This can cause localized hotspots to expand more quickly than the rest of the cylinder.

Another possible cause for cracks in the cylinder is corrosion. If the cylinder head and the cylinder block aren't properly maintained, this can result in corrosion or rust and cause them to expand at a more than they ought to. In time, this could also cause cracks.

If your uPVC window doctor near me or door lock is brittle and requires a lot of pressure to turn it could be due to a variety of reasons. A faulty locking mechanism, misalignment or the wear of the handle are typical causes of this problem.

Fortunately it is a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith will usually fix this problem within one hour of arriving at the home. Depending on the needs of your home they can change the locking mechanism, change the window handles, or change the gearboxes. A professional locksmith will be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to 3 Star security Euro cylinders, TS007, that will provide an extra layer of security against burglars. It's a small amount to enjoy the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and use, so it's not a surprise that they can break. If yours breaks it may be difficult to determine the source of the issue and make sure that you repair it correctly.

Fixing your broken handle, whether it's the internal locking mechanism or latch can increase the security of your uPVC door and reduce the risk of draughts. Incorrectly repairing or replacing your handle can be very costly and may cause damage to the door's frame and lock, so it's worth taking the time to do it correctly.

Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be on the inside of the backplate, usually concealed by a screw cap to enhance the appearance. Be sure not to damage any of the internal parts within the handle, for example the plates or levers that are on the opposite side of the spindle. Keep them in the same order to make it easier to replace if necessary.

Then, using a second screwdriver loosen the screw that holds the handle to the spindle on the back. Once the screw is removed, you should be in a position to pull the handle off and pull out the broken spindle. Replace it with a new spindle, making sure it's the same length (you can find them online or at hardware stores). Securely screw it in the correct position. Be careful not to overtighten as this could damage the handle or the window frame.

Ensure the new handle is installed Close the Window Doctor and test the handle. The hope is that it will function smoothly and you'll be able open your window again.

While you're working on the handle, make sure to make sure your uPVC windows are closing properly. If they're not closing correctly, Window Doctor you could encounter draughts or damp in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they shut properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These windows require a handle that acts as a locking device in the frame of the window. The handle is attached to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle is broken, this can be a very frustrating issue.

There are ways to fix this issue. A good locksmith can quickly and efficiently solve the issue. They can disassemble the window handle by using a tool to remove the wheel part of the mechanism that is where the spindle is. This is done without damage to the handle or window frame.

After removing the wheel the technician will inspect the spindle to determine the reason for its break. This involves disassembling the spindle and inspecting each component, noting any wear or damage. This process is usually carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle. This assists in removing any debris or dirt that might be obstructing its normal operation. After that the spindle is cleaned, it can be repaired or replaced. If it's being replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes into both parts of the spindle. This will ensure that the new spindle is a precise fit with the handle.

If the damaged spindle can't be repaired, it could need to be replaced entirely. Home centres sell generic replacements but if the style of your window is unique then it is necessary to find a woodworker or cabinet maker who can replicate the exact component for you. Once the spindle has been installed, it is connected to the handle. The screw holes on the handle with the screws already in the frame. Once the new handle is seated you will be ready to operate your uPVC window.