Ghost Immobiliser Installation

Add a ghost immobiliser to your car and protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning, and immobiliser bypassing.

The system is hidden within the wiring loom of your vehicle making it totally invisible to anyone who is looking. It is created by generating an e-pin code push sequence through existing buttons on the steering wheel doors, door cards and the centre console.

No circuit cuts

It's not a surprise that people want to protect the vehicle they have put so much effort into buying. Traditional security systems, such as wheel locks or alarms, are easily manipulated by thieves. Ghost immobilisers, on the other hand, is a highly effective solution that works silently and cannot be identified by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This generates an unique pincode only available to you. The code can be changed at any point and can be up to 20 digits long, depending on your preference. It also includes a secure emergency code that you can use should you forget your PIN.

The ghost immobiliser is also useful to prevent a relay box in your home from transmitting the signal of your car key, which would unlock the doors and start your vehicle. It could also block the latest techniques of stealing your vehicle such as OBD port hacking. The device is small, weatherproof and hard to spot. It's also very difficult to alter.

The ghost immobiliser birmingham immobiliser has another benefit: it can be inserted into your vehicle without leaving any permanent marks. It is ideal for those who are planning to sell their vehicle in the near future. It is also much quicker and easier to install than a factory-fitted unit.

The autowatch ghost immobiliser fitting Ghost, a revolutionary new generation device, stops thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a devious system that can be installed without removing wires, and does not require additional key fobs. It is also connected to the vehicle's original ECU, preventing thieves from gaining access to it using new keys or replacing the ECU with the use of a "relay". This system has been verified by TASSA and is able to be linked to an International Security Register. Owners can rest assured, knowing that their vehicles are secured from theft.

No scanning with RF

You'll want to safeguard your vehicle from theft when you have spent an enormous amount of money and time customizing it. One way to accomplish this is to install an immobiliser. It will stop your engine from running until you enter a unique pin code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits long which is only known by you, ensuring that only you are able to drive your vehicle. It is also possible to set up a service or valet mode, which will allow you to start your car for a short period without entering the PIN. This will allow your technician to work on your vehicle without you being there. This is a great option for those who want to reduce time and simplify their lives.

Ghost immobilisers are new generation device that connects to your vehicles CAN data network, and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any noise or LED indicator. It can be placed anywhere on your vehicle without affecting the aesthetics.

This stealthy device has been approved by TASSA and could lower your insurance costs. It also has the ability to track that can track your vehicle even if it has been stolen. This is great if you own a rare expensive car that you've spent many hours customizing.

The Autowatch Ghost can be used together with an iPhone app to enable you to start your vehicle remotely in the event you forget your PIN or are not able to enter the vehicle due to a reason. This feature is great for when you have to collect your kids or go on errands, but don't want to risk someone else driving your vehicle. This feature is beneficial if you have to take your car to a mechanic to be repaired or serviced.

Another advantage of the Ghost is that it doesn't transmit or detect radio frequency signals, which makes it unnoticeable to thieves using RF scanning or code grabbing technology. It is also able to protect your car against key cloning and ECU swapping, which are common methods of car theft.

No key to cloning

Ghost immobilisers are an excellent option to protect high-end vehicles and are designed to block key cloning. They stop your vehicle from starting unless a PIN code is entered in conjunction with the standard key fob. This makes it difficult for thieves to steal the vehicle, and may even discourage them from trying. This is a particularly good idea if you have invested lots of time and money in customizing your vehicle, or own a rare or expensive model.

These immobilisers are linked to the vehicle's CAN data network and are completely hidden, which means that their presence is not visible. It is also impossible for a burglar to locate the device using radio frequency scanning or code grabbing technology. This means that a burglar will have to spend a lot more time in order to get your vehicle.

A criminal must know the unique pin sequence and the exact location of the ghost to get around it. However, the pin code is specific to you and may be changed as many times as you like. The pin code is simple for you to remember but mathematically unattainable for autowatch Ghost Immobiliser fitting someone else to understand. Additionally, the engineer will provide you with a backup PIN code that can be used to bypass the pin in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any part of your vehicle. It is compatible with all vehicles and is fully customisable to match the appearance of your car. It is also very easy to use and cost-effective. You can even transfer the device to a different vehicle if you switch vehicles during the course of ownership, providing that the new vehicle is compatible with it.

The CAN bus can be used with other security features. For instance, it can detect the damage to your vehicle and warn the owner. It can also shut off the engine in the event that the car has been tampered with. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. It can also alert the owner if the vehicle is moved.

No OBD port hacking

Ghost employs a hidden immobiliser module connected to your vehicle's CAN data network that prevents thieves from hacking into your car to disable the alarm, deactivate the key fob and generate new keys. This technology is a significant improvement over the traditional methods used by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or changing your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking, and theft of replica cars. It works without LED indications or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) which must be entered first before you can drive your car away.

Modern thieves use diagnostics to detect cuts in the circuit in your vehicle. They are able to bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.

Another benefit of a Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your vehicle. This is a major advantage over traditional security systems which can be bypassed by simple modification of cables or a screwdriver.

If you forget your PIN, you can reset it easily by using the emergency PIN override function on a mobile device or computer. This is helpful if you need to start your car after having left it in a garage, or by using a valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and can be installed by our authorized installers. It has an RFID fingerprint system that allows specific parts to be identified, which will enable the return of stolen components in the event of their being discovered. It can also be switched into 'service mode' which allows the engine to start when your car is in a garage or using valet parking services however, you must enter your PIN code in order to exit the vehicle again.