Double Glazing Window Repair

Over time double glazing may develop problems such as difficult to open windows or doors that is snagged. Fortunately, these problems can be fixed easily.

Many homeowners attempt to fix these issues themselves but this should be left to experts. Doing this without the right tools and experience could lead to damage.

Broken Panes

A broken window pane is a nagging and uncomfortable issue. It can let cold or hot air into your home and leave a gap which allows moisture or debris to get in. It can also decrease the efficiency of your energy, since your AC and furnace must work harder to keep your home warm. Depending on the weather and whether you have single-pane or double-pane windows, you might be able to temporarily repair the damage using silicone sealant. For a permanent fix, you will need professional help.

A damaged window can be fixed using heavy-duty tape. A tape strip placed over a crack can stop it from escalating. A crack that extends through the glass or is too big to be covered by tape must be replaced completely.

Broken glass can be caused by numerous factors: Double Glazing Repair a stray pebble from the lawnmower that hits the window; an unintentionally placed drink heavily on a glass-topped coffee table or a pet's exuberant leap when you open the door. The frames of your window could shift over time and break the packaging material that holds the glass sheets.

Wear thick work gloves when you've broken a pane of glass. Place a cardboard box near the pane to collect any shards. Then, remove the sash from the frame and work on a flat surface, such as a table. Wear a mask so as not to inhale the glass shards.

After you have removed the old glass, clean any varnish or paint from the window frame. You can use a heating gun to soften old glazing putty or metal glazing points which held the glass in position.

Then you can determine the opening of a new glass. To allow for expansion and contracting it is recommended to purchase an alternative glass that is slightly smaller than the opening. Visit your local hardware store or home center cut the glass to these measurements.

Once you have the glass, you can press it into the frame. If there are gaps, fill them with silicone caulk, which you can purchase from a home improvement store. Then, smooth the caulk with a putty knife. Add glazier's points to the corners of the glass and frame every six inches, to ensure that they hold the pane securely in place.

Condensation

Condensation can happen on double-glazed windows, whether they are old or new. This is particularly true in winter, when colder air meets warmer glass. While it could cause some issues, it's usually a major issue. Condensation on windows is a sign that your double glazing system is functioning properly.

However, it can be an indication that the seal is not working and water is leaking through the gaps between your window doctor panes. If you notice a milky smudge on your window or water beads appear on its surface, this needs to be addressed to stop the growth of mould, mildew or further damage.

Luckily condensation can be eliminated quite easily. A technician will drill small holes into the frame of the window to allow the moisture that has been trapped to escape. This process is referred to as defogging. It also can help to remove any stains caused by the trapped moisture.

Defogging does not fix the underlying issue of a failing window seal. In fact, it may not do so even in the event that the condensation is gone, because the compromised air that was between the panes is still there. This could mean that you will still not get as much heat insulation from your windows as you should.

It is essential to consult an expert as soon as you discover that your windows are damp to determine the next steps. They might suggest a solution such as adding vents to the windows that let fresh air to enter but don't allow warm air to escape.

It is the last thing you'll need for your double-glazing to go down. This is especially true when it can be costly to replace. Fortunately, with the right knowledge, skills and tools, it's possible to repair your double glazing and keep it in great condition for many years to come. If you require repairs to your double glazing contact us today to find out how we can assist. We provide a range of services from replacing one or more panes of tempered glass to installing energy efficient upgrades.

Leaks

Leaks can cause damage and can be costly to fix. It can be costly to fix, and is usually a sign that your property is suffering from other issues like mould or dry rot. This is why it's crucial to fix a leak promptly.

If you notice that your double-glazed windows are draughty it's likely that the seal has been damaged. It could also mean there is no longer any gas argon between the glass panes which is used for insulation purposes. A professional technician can reseal your window to fix this issue.

Sometimes dirt can cause double-glazed windows to become cloudy or misty. This usually means that the seal is degrading and the glass needs to be cleaned. This can be accomplished by a specialist using high-pressure water jets that will swiftly remove any dirt or debris.

If condensation forms between the two panes in your double glazing, this is an indication that the seal is leaky and there isn't any argon remaining between the glass. This is a serious problem and suggests that your double glazing does not protect your home as properly as it should. The glass can be replaced, but you'll have to do it sooner rather than later because the performance of the double-glazed window has been affected.

If you have brand new double-glazed windows under guarantee, you should contact the company who installed them and report any problems with the units or the sealing of the glass since it is unlikely to be covered under the warranty. If you attempt to alter the seals with the units or try to repair them yourself, this could invalidate your guarantee, so you should always leave these repairs to the professionals. We recommend hiring a specialist in double glazing repair.

Weather Damage

Double-glazed windows require a sturdy frame to keep the glass panes together and ensure they stay in place, especially in extreme weather areas. Ice snow, high winds and tumultuous thunderstorms can all result in damage to your windows. If you notice cracks holes or dents in your window, call an expert to repair your double glazing.

If you notice that water is running out of the bottom of your window, it could be a sign that there is a broken seal within the window. This allows moisture to enter your home. Your uPVC window frame or aluminum window frames may also be bent or warped. To fix this, you will have to replace the window seal and re-insert it into the frame.

Window seals help to ensure that your double glazed windows are airtight and keep heat from escaping your home, as well as preventing condensation between the glass panes. The window seals are generally comprised of uPVC or aluminum and hold the glass in place. You can experience problems like the loss of energy and draughts if the window seals fail.

Misting windows are a common issue and are the result of the gas that insulates the double-glazed window breaking. The argon gas keeps the glass in place and forms an airtight seal. However, when the seal is damaged or worn out, it can let the gases escape. The gases released by argon could cause condensation between the glass panes.

The issue can be fixed by replacing the window seal and re-inserting glass. You can apply an anti-fogging treatment to stop future condensation. The best method to do this is to call in an expert to do the work for you.

While it is important to have double-glazed windows they aren't immune to abrasions and will need to be repaired at times. Fortunately, many windows can be restored without the necessity of replacement. To do this, it's recommended to have a few basic tools on hand. You'll need a protective glove, a tape transparent film, or nail polish, scotchtape and a plastic sheet.