Double Glazed Window Repair

Double glazing is an energy efficient investment that reduces loss of heat in winter and keeps your home cool in the summer. Having your double glazed windows repaired as needed is a great method to ensure they are operating effectively.

Over time, your double-glazed windows can suffer from issues such as condensation and misting. Double glazed windows may become difficult to open and close.

Broken Panes

A unruly ball or a flying stone from your lawnmower or even a strong storm can shatter your double-pane windows, leaving you home vulnerable to the elements. Although a cracked glass window isn't easy to fix, Window Doctor it doesn't need to be replaced. In fact the insulated glass that is between the two panes is in good condition and you can repair your double-pane windows with a bit of DIY effort.

First, you'll need to take any broken glass from the frame. This will be a messy job and you'll need to take care to prevent any glass shards from falling onto the floor or slipping out of the frame. Use a pair of gloves to protect your hands, and a rag to cover the area surrounding the broken glass to prevent further breakage or cuts. After removing the broken piece take care to clean the entire frame of the window to get rid of any remaining sealant or debris. It is important to smooth rough areas of the frame to create a smooth surface for your new glazing.

After the frame has been cleaned, you can apply a new layer of glazing to the place in which the broken pane was removed. This is the best way to ensure your window stays safe and sealed and help you save energy costs by keeping water and drafts from getting into your home. The next step is to choose the glazing material. There are many options available, including clear tape that is more durable than regular tape and helps prevent further cracking of your window doctor, or glazing film that is similar to clear plastic wrapping. The advantage of this choice is that it can be painted to match the frame you have and will also keep out rain and snow as well.

Whatever material you decide to use, it's important to press the glaziers points into the place where the putty joins your frame. These will hold the new glass in place and help it to adhere to the frame. The glazier's point can be found in hardware stores, and are available in pre-made ropes that you simply roll over the frame rabbets.

Condensation

If you're experiencing problems with condensation, it's best to call your Window doctor manufacturer. Many companies offer warranties and guarantees to will cover these problems. Condensation and fogging in the panes of glass is an obvious indication that the seals between your windows have been damaged and can only be fixed by a professional who will replace both panes.

This process is a little tricky and requires special tools to take off the old pane and then install the new one, but it can be done by a professional who will provide the necessary equipment. It is recommended to leave the job to an expert. These tools could be dangerous.

If you choose to do it yourself, make sure you wear safety glasses and gloves to shield yourself from any broken pieces of glass that might fly away during the process. It is essential to remove all putty or metal glazing points from the grooves that will hold the new window. Wire-brushing the frame or vacuuming a damp cloth is also recommended. Once the frame has dried, you'll need to order another piece of glass that is 1/8" shorter in both directions than the existing window. Test-fit the glass into the grooves.

Depending on your frames, you will then need to apply a layer of silicone caulk to the grooves in order to ensure that the new pane is secure in place. After the caulk dries and is dry, you must smooth it and make any adjustments needed. The wood molding can be reinstalled.

Double-glazed windows may become difficult to open or close if the weather changes dramatically. Extreme temperatures can cause the frames to shrink or expand and cause them to fall or stick. If this is the problem, you can try wiping down the frames with water and then lubricating the joints. However, it might be best to ask the company that installed your windows for help.

Misunderstood

If moisture is trapped between the glass panes, it can cause misted double glazing. Double glazing is comprised of two panes, which are separated by a gap filled with argon for greater thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside which allows you to keep the temperature at a comfortable level in your home.

As time passes, the seal may break and moisture will begin to accumulate between the window panes, causing them to become misty. This happens because the sun's rays heat the space between the window panes, causing water to vapourize.

This is a natural process however if it occurs between the windows' panes it could be a problem because it won't be able to control the temperature within the room. Instead the temperature outside the window will affect the temperature indoors. Northfield Glass can help you in the event that your double-glazed windows begin to mist.

We can repair the individual blown sealed unit without needing to replace the entire window which is less disruptive than a full replacement. Our misty window repair involves removing the glass unit, washing it, and replacing it with a new one to create an watertight seal.

There are companies within the field that claim to drill holes in your windows with mist and inject chemicals into them, which claim to eliminate condensation and fog, however, we don't recommend this method. This is not only unattractive, but could also damage your toughened glass leaving you with a window that isn't functioning properly.

It is important to fix the problem as soon as possible, as left untreated it can result in the growth of mould which can not only damage the window, but also poses health risks for your family members. Moisture can also cause issues within your home, such as dampness or rot. In some instances it is possible to replace the entire window.

Blown or Failed

Double-glazed windows are made up of two panes of glass with an air or inert between them. This improves their thermal efficiency by keeping heat in and cold out. Over time the gas will become depressurised and cause a variety of issues.

Condensation in between the panes is one of the most frequent. Although it's a normal event, it doesn't necessarily mean that your window is failing however it could be a sign that you need to seal your windows. Condensation could also be an indication of broken double glazing, which could need to be replaced.

Also, look out for draughts coming from your double-glazed windows. This could be due to a failure of the seal or a broken handle or lock. It is crucial to address the issue as quickly as possible. A draught will cause you to pay more for heating. Test the seals on the window frame by feeling for cold air.

Another indication that your window seals have failed is when you start to notice water beading on the inside of your windows. This is an indication that you need to seal your double-glazed windows.

Your window frames are designed to move a bit, as they need to do to keep the glass sheets in place. However, over time, this particular packaging material will be compressed and crack the crucial seal. This will allow the air to circulate between the panes, reducing the efficiency of your window's energy consumption.

A blown seal is a clear indication that your double glazing is damaged and needs to be fixed immediately. A blown seal will stop your double glazing from fulfilling its primary function that is to keep the cold out and warm air in. In addition, a blown seal can let moisture in, which could cause mold and other unpleasant conditions. Call a double glazing specialist when you notice a blown upvc window repairs seal. They can replace the entire unit.