Double Glazing Door Lock Repairs

Have you noticed that your upvc window repairs window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to operate.

It's important that your double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at reasonable costs.

Snapped Key

If a key breaks inside a lock, it can be extremely frustrating. It's also potentially an issue for security, since the door double glazing repair may not lock and could leave you open to intrusion. There are a few easy fixes you can make to resolve the issue and get your door working again.

Remember to remain calm. If you panic and begin poking around wildly, you might just end up pushing the broken piece of the key even further into the lock, which could make the situation much worse.

Spray WD-40, or any other penetrating lubricant, into the lock. This will allow the broken piece come out more easily. You can also make use of a screwdriver to break up any pieces stuck that might be blocking the way. If you have a chunk of the key that is stuck out then grab it using a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as hook extractors, and some Jigsaw blades can also be used for this function. If you don't happen to have one of these tools, you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grip and pull out the last piece of the key that was broken.

If you are unable to remove the broken key piece then you can use a lock deicer. This is usually found in most hardware stores. It works by freezing any moisture or ice that may be in the lock.

If none of these solutions seem to work, it may be time to call a locksmith. Fitlocks experts can fix problems such as broken handles or broken keys with upvc window repairs locks and door mechanisms. They can also modify your double glazing door mechanisms to allow them to operate more easily. You can schedule an appointment online for a double-glazing repair or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. It's a good thing that it's a simple repair for an expert locksmith to complete. Locksmiths will need to tap the cylinder in order to fix it. This can be accomplished with the hammer or other tool. The best method is to make use of a wire or a long match. Then, position the end of the match or wire near the keyway. After that, the locksmith can strike the lock to crack it open. This is much better than using a heavy hammer, which could damage the lock.

Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block and head are made of different metals, like cast iron and aluminium. Different metals will heat up and double glazing repair cool off at different rates. This can cause localised hotspots to expand faster than the rest.

Corrosion can be a reason for cracks in the cylinder. If the cylinder head and the block of the cylinder are not properly maintained, this can cause corrosion or rust, which may cause them to expand at greater rates than they ought to. In time, this could cause cracks.

If your uPVC window or door lock is stiff and requires a lot more pressure to turn, it could be due to a variety reasons. A faulty locking mechanism, misalignment or an old handle are the most common reasons for this issue.

Fortunately, this is an easy and inexpensive fix for most homeowners with double glazing repair (just click the following page) glazing. A professional locksmith should be able solve this problem within an hour of arriving at your property. They can replace the locking mechanisms, or replace the window handles and change the gearboxes based on your particular requirements. A professional locksmith will be able to provide you with a recommendation of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which provide an additional layer of protection against burglars. It is a small cost to get the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They have intricate mechanisms which deteriorate over time. It isn't always easy to pinpoint the reason for the broken window handle lock and then fix it properly.

If the issue is related to the locking mechanism inside or the latch, fixing the broken handle will improve your uPVC double glazing door's security as well as help you to stop draughts. It could be costly to replace or repair your handle incorrectly and it can also harm the frame and lock of your door.

With the window in the open position, loosen the screw that secures the handle with the screwdriver. This should be located on the inside face of the back plate, which is usually concealed by an aesthetically pleasing cover for the screw reasons. Be sure to not damage any of the internal components inside the handle, for example the plates or levers that are on the opposite side of the spindle. Keep them in the same arrangement so that it is easier to replace if necessary.

Next, turn the handle so it's at 90 degrees to the window frame and loosen the screw on the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is released, you'll be capable of pulling the handle away and pull off the damaged spindle. Replace it with a brand new one, making sure that it's the same size as the old one (you can usually find these online or in hardware stores) and then securely screw it in the correct position. Do not tighten the screw too much because this could damage the handle and the window frame.

Close the handle and test it. It should operate smoothly, and you will be able open your window after a few times.

While you're working on the handle, be sure to ensure that your uPVC windows are shut properly. If they don't close correctly, you could encounter damp or draughts inside your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is especially typical in uPVC tilt and turn windows. These windows require a handle that acts as an locking device within the frame of the window. The handle is connected to a rod in the centre that is then activated by a series of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism does not open when the handle has been turned, it is likely the spindle is broken. This could be a frustrating problem.

Luckily, there are ways to remedy this situation. A professional locksmith can quickly and efficiently repair this problem. They will be able to take apart the window handle using a tool that removes the wheel portion of the mechanism where the spindle goes. This is done without damage to the handle or the window frame.

After the wheel has been removed, the technician will inspect the spindle and determine what has caused it to break. This involves breaking down the spindle into its individual parts and meticulously noting their general condition, as in addition to any specific areas of damage or excessive wear. This process is usually carried out by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this helps eliminate any dirt or debris that could be hindering its normal operation. After this the spindle can be repaired or replaced. If it is being replaced the technician could use an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.

If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centers offer generic replacements, but if the design of your window is rare then it is necessary to contact a wood worker or cabinet maker who can make the exact part for you. Once the new spindle is installed, it can be fitted to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the new handle is firmly seated you will be ready to operate your uPVC window.