Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the window and the door is significant, you may want to use security screens that includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window doctor near me. In time, they could develop a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, upvc Window repairs close the window and test it for fit. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close your window and do a test fit. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It's easy to change a window hinge however it is simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by improper installation in the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, causing an opening between the frame and sash. If they're beyond repair, it could be required to realign them. Second, the interlock can also become misaligned. This is located on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.