Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the old frame very easily. If you have double glazing-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging uPVC windows can cause issues with light, upvc Window repairs draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window doctor to get to the frame. With the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Most often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and perform an experiment fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, upvc Window repairs it is more likely the problem is with the seal rather than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in an ease. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide assistance.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. First, the hinges due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. In addition, the interlock could be disaligned. This is located on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some type of filler. They can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you have any problems with your Upvc window, it's best to consult a professional as soon as you can.